Thermador PH48GS, PH54GS, PH48HS, PH42GS, PH36HS, PH30HS Hood Transition, Assembly of the Transition

Hood Transition

The supplied transition mounts to the top or rear of the hood depending on the discharge direction.

10” (254 mm) Duct

1” (25.4 mm)

screw x 2

45/16”

(110 mm)

	Figure 3: Transition
21¾”	4¼”
(553 mm)	(108 mm)

111/16”

(43 mm)

Assembly of the Transition:

A minimum height clearance of 6” (152 mm) is needed above the hood for transition mounting. See Figure 1 on page 3 for overall hood dimensions.

1.Depending on direction of discharge, align mounting holes at base of transition with the mounting holes of the ½” (13 mm) flange located at the top or rear of the hood.

2.Fasten transition to hood using (2) 1” (25.4 mm) sheet metal screws included with hood.

3.Seal connection between transition and hood with aluminum tape.

4.Remove tape holding damper closed.

12

3

Figure 5: Transition Connection

Figure 4: Transition Cutout Dimensions

English 7