Thermador PRD36, PRD48 High Shelf Low Back, Backguard Installation, Available for These Models

Backguard Installation

AVAILABLE FOR THESE MODELS:

PRD364JDGU	Pro Grand® 36" Dual Fuel Range 4 Burner		Griddle
PRD364JDGC	Pro Grand® 36" Dual Fuel Range 4 Burner Griddle - Canadian
PRD366JGU	Pro Grand® 36" Dual Fuel Range 6	Burner
PRD366JGC	Pro Grand® 36" Dual Fuel Range 6 Burner - Canadian
PRD486JDGU	Pro Grand® 48" Dual Fuel Range 6	Burner Griddle
PRD486JDGC	Pro Grand® 48" Dual Fuel Range 6	Burner Griddle - Canadian
PRD48JDSGU	Pro Grand® 48" Dual Fuel Range w/ Steam Oven
PRD48JDSGC	Pro Grand® 48" Dual Fuel Range w/ Steam Oven - Canadian

WARNING:

To reduce the risk of fire or injury to persons, check to make sure all packaging has been removed from accessory devices before use.

Note: If a backsplash is to be used in addition to a back- guard, install the backsplash first and the backguard sec- ond before sliding range into place.

WARNING:

Fingers or hands could get pinched when installing the backguard. Severe injury could result. Use extreme caution and wear thick protective gloves to avoid potential laceration to finger or hand while sliding the backguard down onto the range.

CAUTION:

The High Shelf can get very hot! DO NOT place the following items on top of the High Shelf:

•plastics or containers that can melt

•flammable items

•a total load over 30 pounds (13.6kg)

High Shelf

Low Back

High Shelf Parts Included

(1)High Shelf top panel

(1)High Shelf front panel

(13) T-20 Torx Stainless screws

(16 or 14) T-20 Torx drill point screws

(1) Installation Guide

Low Back Parts Included

(1) Low Back panel

(9 or 8) T-20 Torx stainless screws

(8 or 6) T-20 Torx drill point screws

(1) Installation Guide

Tools Needed

T-20 Torx head screwdriver or drill

Protective Work Gloves

Figure 21: High Shelf & Low Back Front View

English 23