3.Press C (COMPASS) to begin. The 4th center hand rotates two revolutions to remind you to rotate the watch. While level, SLOWLY rotate the watch two revolutions, taking at least 15 seconds per revolution.

4. When done, press C (COMPASS), keeping the watch level. The 4th center hand moves back and forth to acknowledge the end of calibration and then moves to the current magnetic declination setting.

5.If you do not wish to set the magnetic declination, push the crown in. Otherwise, to have watch automatically compensate for the declination angle, turn the compass ring until north is at 12 o’clock.

6.Press A or B to move the 4th center hand west (-) or east (+), respectively, to point to your location’s declination angle using the declination scale. Hold a button to move the hand quickly. See the figure below for an example.

7.Push the crown in when done.

Magnetic declination set to -14° (14°W)

28

29

Page 17
Image 17
Timex W273 EU1 355-095013 manual Magnetic declination set to -14 14W