Timex W273 EU1 355-095013 manual

1.Pull the crown out to position 3. The 4th center hand will point to 12 o’clock.

2.Rotate the crown to position the minute hand in the correct position within the hour required for the loca- tion you are wishing to use for the 2nd and 3rd time zones.

3.Push the crown in to position 2. The 4th center hand will point to its currently calibrated position of the minutes within the hour.

4.Push button A to move the 4th center hand clockwise until it aligns with the minute hand. Pressing and hold- ing button A will make the hand move at a fast rate.

5.Pull the crown out to position 3. The 4th center hand will point to 12 o’clock.

6.Rotate the crown to position hour and minute hands to the correct time.

7. Push crown in to position 1 when finished.

Please note: The 4th center hand will track the time using the current calibration of the minutes within the hour. Time zones 2 and 3 both utilize the 4th center hand and therefore the locations being tracked in time zones 2 and 3 must both utilize the same minutes within the hour for these time zones to be displayed properly.

SETTING THE 4TH CENTER HAND (TIME ZONE II) Note the current time in the location you wish to track as the 2nd time zone. Press button A until the 4th center hand is pointing to that time on the inner ring. (Please note: this scale is a 24-hour format). The 4th center hand will advance 30 minutes each time button A is pressed. Pressing and holding button A will make the hand move at a fast rate. This will set the 2nd time zone on the watch.

86 87