HL_DM5201_GB.qxd
Deskmaster
15.4 Flash commands on analogue port
When you have an analogue telephone with Flash key, you can handle two calls at the same time on the analogue port. Use following commands: (R = flash key)
Command | Function | State |
|
|
|
R | To hold active line | 1 connected call |
R | To answer second incoming call | 1 connected call, second call knocking |
|
|
|
R1 | Finish active call and resume first call | 1 connected call, 1 call on hold |
|
|
|
R2 | Switch between two calls | 1 connected call, 1 call on hold |
R3 | 3 party conference | 1 connected call, 1 call on hold |
|
|
|
R4 | ECT : external call transfer | 1 connected call, 1 call on hold |
|
|
|
Note : The flash key is a short
flash key between 100 and 380 ms.
15.5 MSN for the Analog Port
• Go to the system parameter menu.
| • Go to the MSN menu. | |
|
| The menu can be accessed directly |
|
| using the shortcut 259. |
| • | The first MSN will be displayed. |
4* | • | Select the analog port MSN. |
• Enter a new AB MSN.
• New or modified MSN will be stored.
250 System param.
System param.
253 charge
System param.
259MSN
MSN : 1 (Voice)
MSN : 5 (AB)
MSN : 5 (AB) 23645_
15.6 Selection the ISDN call type on the analogue extension (520 model only)
When dialling out from the analogue phone connected to the Deskmaster 520, it will use the ISDN type ‘3.1 k telephony’ to indicate the call is coming from an analogue extension. If you call up another ISDN equipment, you can only get connection if the other end accepts this type of call. If you connect fax or other equipment to the analogue port of the Deskmaster 520, you can change the ISDN type.
• Idle state
Fri. | 21 Feb 99 | 17: 26 |
ISDN |
|
|
44
