HL_DM5201_GB.qxd 16-04-2003 13:24 Page 20

Deskmaster

Please note, that Call Forwarding has to be enabled in the ISDN Exchange. In addition, the own MSN number has to be programmed for your phone.

(See section Programming – Programming Multiple Subscriber Numbers (MSN)).

9.1.1Call Forwarding Enabled/Disabled

Idle State.

• Go to the menu item diversion. (Function code “220”

will be displayed optionally.)

• Select the diversion required, using the arrow keys : diversion to; delayed; on busy

9.1.2 Enter/Change Call Forwarding Destination

• Enter new destination for diversion.

• Select the right MSN number.

This menu is obsolete, if only one MSN has been programmed.

Display indicates temporarily that the configuration was successful.

The LED for the “INFO” key will start flashing.

9.2Phone Barring

Mo.

21 Feb 99

17:26

 

 

 

220 Diversion

Typ of div. :

Diversion to

Number to 0711839262

Terminal addr.

MSN : 0 …

Diversion ON

Mo.

21 Feb 99

17:26

 

 

 

You can protect your telephone against unauthorised usage by means of 4 different levels of barring outgoing public calls. You can chose between the following barring options:

Total

Your phone will be locked for all outgoing calls.

National

Only local calls will be allowed.

 

 

 

International

Only countrywide calls will be allowed.

Barring OFF

There are no restrictions.

 

 

 

Note : The phone has 3 programmable emergency numbers, which may be dialed at any time and regardless of the set bar- ring options. By default, the emergency numbers 110 and 112 are programmed. The emergency numbers are available from the system parameter menu.

20

Page 20
Image 20
Topcom 520, 500, 510 manual Phone Barring