Topcom 6800 Roger Beep On/Off, Key-Tone On/Off, Dual Channel Monitor function, Selection

Topcom Twintalker 6800

b. Sending a call Tone

Press briefly. The call tone will be transmitted for 3 seconds on the set channel.

13.12 Roger Beep On/Off

After the PTT	- button is released, the unit will send out a roger beep to confirm that you have
stopped talking.
To set the Roger Beep.
•	Press	5 times. ‘ro’ will be displayed.
•	Press	to enable (ON) or	disable the Roger-Beep (OF).
•	Press	PTT to confirm your selection and return to the standby mode.

13.13 Key-Tone On/Off

When a button is pressed, the unit will beep briefly.

To set the key-tone.
•	Press	6 times. ‘to’ will be displayed.
•	Press	to enable (ON) or	disable the Roger-beep (OF).
•	Press PTT	to confirm your selection and return to the standby mode.

13.14 Dual Channel Monitor function

In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive signals transmitted on that channel and CTCSS code.

Dual Channel Monitor allows you to monitor a second channel with CTCSS code.

•	Press		7 times, DCM OFF appears on the display.
•	Press		or	to change the channel.
•	Press		to confirm the channel selection and go to CTCSS SUB-
	CHANNEL	SELECTION
•	Press		or	to change the CTCSS.
•	Press PTT		to confirm.

To disable the function select ‘OFF’ when setting the channel.

When the Dual Channel Monitor function is activated, the PMR will switch sequentially be- tween the standby channel + CTCSS and the Dual Channel + CTCSS.

12 Topcom Twintalker 6800