Topcom Twintalker 6800
13.8 Monitor
You can use the MONITOR feature to check for weaker signals in the current channel.
•Press 
and 
simultaneous to activate channel monitoring. Hold these buttons for 3 seconds for contiuous monitoring.
•Press PTT to stop monitoring
13.9 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will transmit a signal when it is activated by your voice or other sound around you. VOX operation is not recommended If you plan to use your radio in a noisy or windy environment.
•Press 
3 times.
• Press 
to turn the VOX feature ON and press 
again to select the VOX sensitivity level which is indicated in the right corner of the display. Press 
until OF appears on the display, to turn VOX OFF.
•In the VOX mode, the VOX icon will be displayed.
•To confirm your selection and return to the NORMAL mode, press PTT .
13.10Channel Scan
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
•Press and hold 
. Press 
briefly to start scanning.
• Release the buttons.
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear the active signal.
•Press PTT to communicate through the active signal channel. Press 
to deactivate channel scan.
When an active signal (one of 8 channels) is detected, press 
or 
to bypass the current channel and continue to search for another active channel
13.11 Call Tones
A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press 
4 times. CA will be displayed.
• Press 
or 
to select another call tone or select OF to enable call tones.
• Press PTT to confirm your selection and return to the standby mode.
ENGLISH
Topcom Twintalker 6800 | 11 |
