Topcom Twintalker 6800

13.15 Button Lock

• Press and hold for 3 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.

• Press and hold again to deactivate BUTTON LOCK

13.16 Headset connection

The Twintalker 6800 can be used with an external microphone and speaker (included) The connector is located under the protective rubber cover on the top of the unit.To attach the external speaker/microphone headsets or earpiece, lift the rubber flap on the top of the unit to expose the connector.

Insert the appropriate plug into the connector.

14 Quick charger

14.1 Caution

The charger is designed for indoor use. Do not expose to rain, snow or extreme conditions.

This charger is not intended for use by young children or infirm persons without the supervision to ensure that they do not play with it.

To reduce risk of injury, charge only Ni-Mh or Ni-Cd type rechargeable batteries. Do not not charge mixed Ni-Mh and Ni-Cd batteries at the same time.

Do not attempt to charge any non-rechargeable batteries.

Do not disassemble the charger or batteries.

Do not short circuit batteries.

Do not charger batteries in direct sunlight.

Do not operate the charger if it is damaged.

14.2 Operation Instructions

ENGLISH

4

3

POWER

 

 

 

 

NIM

 

 

H/NICD

 

A

2

HOUR

 

 

 

2

RAPID CHARGER

B

Plug the small plug of the adapter into the CHARGER and the other end in the electrical socket.

The green LED (4) will turn on.

Insert 2 or 4 batteries size AA or AAA into group A (2) and/or B

(1). Follow the polarity as indicated in the battery compartiment. LED A and/or B (3) will light up to indicate that they are charging.

A

 

1

Batteries must be always charged in identical pairs.

 

B

When the batteries are full, the corresponding LED will flash. When all batteries are fully charged, trickle charge will start until the batteries are removed.

Topcom Twintalker 6800

13

Page 13
Image 13
Topcom 6800 manual do utilizador Quick charger, Button Lock, Headset connection, Operation Instructions