Topcom HB 10M00 manual Changing The Battery, Power Save Mode, Watch & Chest Belt, Gps Pod

TOPCOM HB 10M00

4 CHANGING THE BATTERY

If you are not confident with electronics, let the battery be changed by a professional. Do not open the watch yourself.

4.1 WATCH & CHEST BELT

THE WATCH AND CHEST BELT HAVE ALREADY A BATTERY INSIDE, so no need to place this battery when you just bought it. To turn the watch on see “5 Power save mode”.

1.Turn the battery cover with a coin counterclockwise

until the arrow is pointing to the arrow.

2.Turn the cover gently further to pop it out. 3.Put the battery cover aside.

4.Remove the empty battery. 5.Insert a new CR2032 bat-

tery, the (+) side of the bat- tery must touch the ‘L’- shaped metal contact.

6.Make sure the sealing rubber O-ring is placed correctly in its slot before the battery cover is closed.

7.Put the battery cover back with the arrow on the cover pointing to the arrow, and then press the cover down gently until it is on the same level as the surface.

8.Turn the cover with a coin clockwise until the arrow is pointing to the dot.

4.2 GPS POD

The GPS pod has a build-in battery which can’t be removed/replaced unless you send it out for repair. Please follow the repair instructions if the battery of your GPS pod doesn’t work anymore.

5 POWER SAVE MODE

This watch is sold with a power save function so that the battery can last longer. To turn this watch (display) on, press any key.

To activate the power save mode press the LAP/RESET key [ ] for 5 seconds in time mode.

4