Topcom manual Removing a handset, If your additional handset is a Ogatech OG-T700

TOPCOM OGATECH OG-T700/Twin/Triple/Quattro

To register any handset, the base must be put into a special registration mode:

1.Press and hold the paging key of the base for 6 seconds.

2.The base will then emit a beeptone. The base is now ready to register a new handset. You have 90 seconds after pressing the button to register a new handset.

After putting the base into registration mode, start the procedure on the new handset:

6.1.1 if your additional handset is a OGATECH OG-T700

3.Enter the menu by pressing /OK

4.Select REGISTER using the up and down keys

5.Press OK

6.Select REG BASE using the up and down keys

7.Enter a base number ( from 1 to 4 ). The flashing numbers are already in use.

8.Enter the Base PIN code (0000 by default )

9.Press OK. The handset will start searching for the DECT base

10.If the handset has located the base, it will display the base identification number, validate the base registration by pressing OK or stop by pressing .

11.If the handset does not locate the base, it will return to the standby mode after a few seconds.

12.Try again by changing the base number and check that you are not in a environment where there is interference. Move closer to the base.

6.1.2 if your handset is another model

After starting the registration procedure on the base, refer to the handset manual to find out how to register the handset. The handset must be GAP compatible.

The icon and the text "NOT REG" flashes on the display when the handset is not associated with the base. When a handset is associated with a base, it is attributed a handset number by the base. It is this number that is displayed on the handset after the name and must be used for internal calls.

DECT GAP Profile only guarentees that basic calling-functions will work correctly between different brands/types. There’s a possibility that certain services (like CLIP) will not work correctly.

6.2Removing a handset

You can remove a handset with a base to allow another handset to be registered

1.Enter the menu by pressing /OK

2.Select SETUP using the up and down keys

3.Press OK

4.Select DEL HANDSET using the up and down keys

5.Press OK

6.Enter the 4 digit base PIN code

7.Press OK

8.Select the handset to be removed

9.Press OK to validate

ENGLISH

TOPCOM OGATECH OG-T700/Twin/Triple/Quattro 23