TOPCOM OGATECH
You can press the 
-key shortly to hear the day and time.
7.1.5 Memory Full
If the memory is full, the answering ON/OFF LED will flash on the base rapidly (0,5 sec. ON/OFF). If the answering machine is turned On and a call comes in, the machine will automatically play OGM 2 (answering machine function without recorded caller message). When listening to the messages, the internal voice will announce that the memory is full and then play back the messages.
Erase some or all the messages after listening to them.The memory is free again.
7.1.6 Programming the VIP Code
The VIP code is a
Press and hold the
•Press the 
or 
to change the first digit of the VIP code and press the
•Repeat above until all 3 digits are set.
If you do not press any keys for 20 seconds, the previous VIP code is saved and the machine automatically exits the VIP setting mode.
7.1.7 Recording and selecting a Outgoing message
•Press and hold the 
•Press the 
to select OGM1 or 
to select OGM2. The selected message will be played.
•After the selected OGM is played the internal voice will ask you to press and hold the 
or 
to record a new one depending of which OGM you have selected. Press and hold the corresponded key 
or 
during
recording.
•Stop recording by releasing the key. The new recorded message will be played.
7.2Operation
If a call is received and the answering machine is turned ON, the answering machine will automatically answer the call after the set number of rings.
If outgoing message 1 has been selected, the message will be played, a beep will be heard and the caller can leave a message (max. 3 minutes).
If outgoing message 2 has been selected, after the beep, the line will automatically be disconnected. The caller doesn’t have the possibility to leave a message.
26 | TOPCOM OGATECH |
