22 Preference Settings

3.2.5 High definition television

The digital receiver supports various video resolutions from 576 to 1080. In general a resolution of 720 or more is considered high definition. The higher the resolution is, the better quality you can enjoy. However, if your television set does not sup- port high definition, you cannot enjoy high definition quality picture.

Set the HDMI Output option as you desire. The available values for this option are changed according to the TV Type option. If you set this option to 576P, the digital receiver will present even high definition programmes in resolution of 576. On the contrary, if you set it to 1080I, the digital receiver will present even standard definition programmes in resolution of 1080.

NOTE

You can enjoy only standard definition video with the following connectors:

Composite video connector (VIDEO)

S-Video connector (S-VIDEO)

SCART connector (TV)

3.2.6Video scaling

By adjusting the Video Output Scaling option, you can inflate or shrink pictures from 20 to +20 percent so that they could fit tight to the frame of your television without black space.

3.2.7 Audio mode

Basically, there are two audio sources as you can find two audio sockets on the back panel of the digital receiver. You can enjoy only one source or both of them in either stereo or mono. Set the Sound Mode option as you desire.

Apart from this setting, you can change the sound mode with the button. See § 5.2.4 for detailed description.

Page 28
Image 28
Topfield TF 600 PVRt manual High definition television, Video scaling, Audio mode