Topfield TF 600 PVRt 8.2 Conguring the wireless network settings on the digital receiver

66 Accessingto The Digital Receiver via The Internet

8.2 Conﬁguring the wireless network settings on the digitalreceiver

Youshould conﬁgure the WLAN settings to enable the web

serviceand FTP service. Youhad better refer to the manual of

yourrouter for understanding of technical terminology.

NOTE

Yourrouter should be within ﬁve meters of the digital receiver.

IPconﬁguration

Selectthe Installation

LANSet-

ting>IP Conﬁgurationmenu.

Youmay assign a dynamic IP ad-

dress to the digital receiver. To

do so, set the DHCP option to

On. You can view the dynamic

IP addressassigned to the digi-

talreceiver by your router at the

WLANStatus menu.

Wheneverthe digital receiver is restarted, the dynamic IP ad-

dress will be changed and you will have to check it at the

WLAN Status menuto accessthe digital receiver. To avoid this

cumbersomething, youhad better assign a static IP address

ratherthan dynamic one.

Setthe DHCP option to Off, then the IP Address,Subnet Mask

andGateway options become enabled. Youhave to set these

optionsto match the conﬁguration of your router.

Setthe User ID and Password options as you desire. When you

accessthe FTP server, you will be asked for the account that is

madewith these options