28 Service Search
transponder. To do that, set the Search Mode option to Manual, and then at the Channel option select your desired transponder. The number ranges from 5 to 12 in VHF and 21 to 69 in UHF.
To search one service of a transponder, set the Search Mode option to Advanced, and at the PID option specify the PIDs of your desired service with the numeric buttons. PID (Packet Identifier) is a set of numbers that identifies transport stream packets.
To start service search, select the Start Search item; then a list
box appears, in whichfound services will be listed. When it has
completed, press the OK button to save found services . To stop at any time or to exit without saving, press the EXIT button.
4.2Resetting to factory settings
The digital receiver maintains the following data:
•Services list
•Favourite list
•Timer list
•Preference settings
You can reset all data of the digital receiver. To do that, select the Installation > Factory Setting menu, and then you are asked for confirmation. If you select Yes, service entries, favourite entries and timer events will all be deleted, and preference options will be reset to the manufacturer’s factory settings.
The digital receiver will ask for your location and language after resetting all the data. You have to designate them so that you can perform service search again.
NOTE
