16 Setup
2.5.1 Insertingbatteries in the remote control
Toinsert the batteries, open the battery compartment by remov-
ingthe lid, and then insert the batteries observing the polarity,
whichis marked on the base of the battery compartment.
Ifthe digital receiver no longer reacts properly to remote con-
trolcommands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for the
damageresulting from leaking batteries.
NOTE
Batteries,including those which contain no heavy metals, may
not be disposed of with household waste. Please dispose of
usedbatteries in an environmentally sound manner. Find out
aboutthe legal regulations which apply in your area.
2.5.2 Poweringon and checking picture
Now,press the buttonin top left corner on the remote con-
trol.
Ifyou do not see a picture, check that the television is set to the
correctinput.
If the picture is good, you can skip to
§
4.1 to search for the
available television and radio services. Otherwise, you may
need to temporarily connect the composite video connector
(VIDEO)to your television set so that you can see the on-screen
menusin order to configure the video settings.