14 Setup
NOTE
You cannot view high definition video with the composite
videoconnector.
Toconnect the audio connectors
Youwill need to obtain an audio cable (RCA
cable)to connect the audio connectors. Plug
one end of the cable into the AUDIO L
(white) and AUDIO R (red) sockets on the
digital receiver, and the other end into the
matching sockets on your television or au-
diosystem.
To enjoy Dolby digital audio, your televi-
sion or audio system must be able to de-
codeDolby digital audio, and you will need
to obtain a S/PDIF cable. If you want to
usethe COAXIAL connector, prepare a coax-
ial S/PDIF cable (RCA cable); otherwise, to
use the OPTICAL connector,prepare an op-
tical S/PDIF cable. Plug one end of the ca-
ble into the S/PIDF socket on the digital re-
ceiver,and the other end into the matching
socketon your audio system.
2.4.3 Insertingbatteries in the remote control
Toinsert the batteries, open the battery compartment by re-
movingthe lid, and then insert the batteries observing the po-
larity, which is marked on the base of the battery compart-
ment.
Ifthe digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
usedbatteries. Themanufacturer accepts no liability for dam-
ageresulting from leaking batteries.