42 Recordingand Playing
To stop recording, press the
button; then a box like
the left figure appears, which
shows programmes currently
being recorded. If you select
one,its recording will stop.
While a recording is going on,
youcan watch or record another
service.
Toadditionally record another service, switch to the service
youwant to record, and press the button.
Once a recording is started, it is put on the recorded pro-
gramme list even though it is not finished yet. The recording
file is named after its service name with a suffix of a num-
ber. Toview the recorded programme list, press the but-
ton. See § 7.2 for detailed description about the recorded pro-
grammelist.
7.1.2 Timer recording
Youcan make a programme to be recorded at a specific time.
Even if the digital receiver is in standby mode, it will switch
intooperation mode and start recording at the specified time.
Whenthe recording comes to the end, the digital receiver will
switch into standby mode again in one minute. However, if
you press any button on the remote control or on the front
panel even just one time, the digital receiver will not switch
intostandby mode.