SA41 ELECTRICAL SPECIFICATIONS
INVERTER TYPE PWM Full bridge power stage, with true sine wave AC output.
DEMAND START SECTION |
|
|
Type: |
| Pulsing AC |
Minimum Load Power to start (User adjustable): |
| 3W to 20W |
Maximum response time: |
| 1 sec |
Standby current from battery (Average): |
| 60mA |
BATTERY VOLTAGE RANGE |
|
|
Low DC Volts Disconnect (Instantaneous): |
| 34V |
Low DC Volts Cutout (Delayed, User Adjustable): | ||
Low DC Volts | ||
High DC Volts Cutout (Instantaneous, User Adjustable): | ||
High DC Volts Disconnect (Instantaneous): |
| 70V |
TOTAL APPLIANCE RATING AT | 25°C | 40°C |
Continuous: | 3000W | 2800W |
30 Minute rating: | 4700W | 4400W |
5 Minute rating: | 5300W |
|
1 Minute rating: | 6500W |
|
Surge rating: | 8500W |
|
INVERTER EFFICIENCY |
|
|
Peak (at 500W): |
| 91% |
No load power consumption (C0NT mode): |
| 0.66 A |
MISCELLANEOUS SPECIFICATIONS |
|
|
Output Frequency Accuracy: |
| 50Hz ± 0.001 % |
Output Voltage Accuracy (0 - 2200W) |
| 240V ± 4 % |
Total Harmonic Distortion (THD) |
| < 4 % |
Control Outputs 1 & 2, max DC sinking current: |
| 50 mA |
Alarm Inputs 1 & 2, input switching level: |
| HI > 3 V |
|
| LO < 1 V |
Operating temperature range: |
| |
Weight: |
| 32 kg |
DC Input is Electrically Isolated from AC Output
Note: Through a policy of continued development, specifications are subject to change without notice.
The above specifications are based on unity power factor.
18
