BUZZER ON / OFF
Buzzer : ON
[Set Parameters]
BUZZER LOCKOUT
Buzzer Lockout : OFF
[Set Parameters]
MORE SETTINGS
Any key to end
or DOWN for more
SET DAY
Day : MON
[Set Parameters]
This display allows you to select whether the audio alarm sounds during an overload or other alarm conditions. If set to OFF the buzzer will not sound during an alarm condition. The alarm condition will still be displayed. Pressing the UP or DOWN keys will change the setting.
If set to ON, lockout prevents the buzzer from sounding during the lockout period. See lockout on page 11. Pressing the UP or DOWN keys will change the setting.
Pressing NEXT DISPLAY or UP keys will save the settings entered and go back to ‘Displays’. If the DOWN key is pressed, more settings will be displayed.
Sets the current Day. Use the UP and DOWN keys to set the value.
SET HOUR (TIME OF DAY)
Hour : 15
[Set Parameters]
Set the hours in the current time of day (24 hour time). Use the UP or DOWN keys to set the value.
SET MINUTE (TIME OF DAY)
Minute : 30
[Set Parameters]
Sets the minutes in the current time of day. Use the UP or DOWN keys to set the value.
DEMAND START SENSE
DS Sense : 6W
[Set Parameters]
This sets the minimum load which will bring the SA41 ON when the inverter Status is set to STANDBY mode (demand start or pulsing). See page 5. In most cases the default setting of 6W would be suitable. If there is a load which the SA41 won't sense then reduce this value until the SA41 starts. Alternatively if there is a small load that keeps the SA41 on then increase this value. You may need to try a few different settings to find the most appropriate value for your installation. Use the UP or DOWN keys to set the value.
10
