Chapter 6 Hardware Setup
6.1 Setting the BIOS
The method of displaying the BIOS screen and the displayed content (default value) are shown below. Check the content before using or when there is an abnormal condition.
Important
•Do not enable the suspend function when using the WDT function. This may cause a
The suspend function is a power saving method and cannot be used together with the WDT function.
(1) Turn on the main unit power.
The following BIOS startup screen appears.
PhoenixBIOS X.X Release X.X.X
Copyright
All Rights Reserved
CPU = Pentium(R) III prosessor 500MHz 636K System RAM Passed
XXXM Extended RAM Passed 256K Cache SRAM Passed System BIOS shadowed Video BIOS Shadowed
UMB upper limit segment address:F0DF Fixed Disk 0:(DISK Maker/Type)
Press <F2> to enter SETUP
BIOS startup screen
40 | Computer module C2PU37 User’s Manual |
