2.Precautions on Installation
WARNING
Mandatory
Be sure to ground the model 2000. The protective ground terminal of the model 2000 must be connected to an external protective earth.
Operation without grounding may cause accidental fire or shock.
CAUTION
Mandatory
Avoid the following locations when installing or storaging the model 2000.
∙Locations where there is dust, salinity or ion particles
∙Locations where there are corrosive gases (SO2, H2s) or flammable gases
∙Locations where vibration or shock occurs beyond the allowance
∙Locations where there is condensation due to sharp temperature variations
∙Locations where the ambient temperature exceeds the allowance range
∙Locations where the relative humidity exceeds the allowance range
∙Locations where the model 2000 is exposed to direct sunlight
∙Locations where strong electric radiation or magnetic field is generated
Mandatory
Improper the installation or wiring of the system can cause not only insufficient performance but also malfunction and failure of the model 2000.
Installation in an unspecified direction or improper installation can cause
Mandatory
Install the model 2000 at a place where maintenance and inspection are easy to do. Otherwise, recovery from failure may take much more time, leading to a serious accidents.
Forbidden
Do not cover the hole of the model 2000, and the ventilator/air inlet of the system. Otherwise, overheating, etc. can cause fire or malfunction.
Mandatory
Avoid entering wire scraps or other foreign debris into the model 2000, and related equipment. Otherwise, it can cause fire, failure or malfunction.
6F8C1111 | iii |
