Features: PC Settings, Input Selection
Using the PC settings
You can adjust the horizontal/vertical picture position, frequency (to minimize vertical stripes on the screen), and phase (to remove horizontal noise and sharpen the picture) manually or auto- configure these settings all at once.
1.Confirm a PC is connected (see "Connecting a personal computer (PC)" on page 12).
2.Repeatedly press 
on the remote control or on the TV side panel to select PC input mode.
3.Press MENU, and then press 
/ 
until the PC menu appears.
4.To automatically adjust the settings, press 
to highlight Auto and then press OK. The TV will automatically adjust the screen position, frequency, and phase. Allow a few seconds while
| PC | |||
Auto |
|
|
|
|
Frequency |
|
|
| 32 |
|
| |||
Phase |
|
| 32 | |
H. Position |
|
|
|
|
|
|
|
| |
|
|
|
| |
V. Position |
|
|
|
|
|
|
|
|
|
MENU OK EXIT
5.To manually make the appropriate adjustments to other items, press 
to highlight the item to be set and then press 
/ 
to make adjustment.
• Frequency
Minimizes any vertical bars or stripes appearing on the screen background. The adjustable range may vary depending on the input mode.
• Phase
Reduces (or minimizes) any horizontal noise and clears up or sharpens the character images. The adjustable range may vary depending on the input mode.
• H. Position/V. Position
Adjusts picture left/right and up/down. The adjustable range may vary depending on the input mode.
Selecting an input signal
If you would like to view image coming from another device connecting to your TV, repeatedly press 
to select your desired input signal on the remote control or the right side panel of the TV.
Input selection
A selection menu displays on screen after the first button press.
TV
EXT1
EXT2
EXT3
PC
Note: When an
Make sure the equipment you want to view is correctly connecting to the TV. See "Connecting external equipment" on page 10 for details.
In addition to accepting signals from external devices, the TV can meanwhile output signal to
other external devices via | (SCART 1) or | |
(SCART 2). |
| |
Selected input | Using input | Available output |
mode | connector | connector(s): |
|
| Output signal |
TV |
| : Tuner, |
|
| : Tuner |
EXT1 |
| : CVBS |
| : Tuner | |
EXT3 | (Video) | : Tuner, |
|
| : Video |
: Tuner, | ||
| or | : Tuner |
PC | PC | : Tuner, |
|
| : Tuner |
e.g. When you want to view an image coming
from 
, make sure the connector is correctly connected to an external device and select EXT1 as the input mode. You can connect another
equipment to 
for recording or displaying the image in CVBS format via a SCART lead.
To exit this menu, press EXIT or OK, or just wait for a few seconds to let the menu disappear.
