2.In the General tab, enter the items as described below.
Directory Server Address or IP — Enter the server name or IP address of a LDAP server.
This Server requires me to log on — Check this if the LDAP server requires the user name and password to log on.
Account Name — Enter the user name to log on the LDAP server. Password — Enter the password to log on the LDAP server.
Log on using Secure Password Authentication — Check this to use secure password to log on the LDAP server.
Character code setting — Select the character code for the LDAP server.
3.In the Advanced tab, enter the items as described below.
Server Port Number - Directory service (LDAP) — Enter the port number to access the LDAP server. It shows “389” as a default. Change this number if you are sure the LDAP port number is changed from the default port number on the LDAP server.
Server Port Number - This Server requires a secure connection (SSL) — Check this when you require to access the LDAP server using SSL.
Search - Search timeout — Select the timeout interval for searching.
68 | Network Fax Guide — Managing Address Book |
