e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
1-5
1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
1.2 To Adjust the Density on a Solid Colored Image If the density is decreased If the density is increased
The solid colored area becomes lighter. The solid colored area becomes darker.
Explanation
In thick paper printing, the density of a solid colored image can be made darker to enhance it or lighter in order
to match with the type or color of the original.
<Notes> • The function described in this chapter cannot be used for plain paper 1 and 2 in the full color
mode.
The type of plain paper 1 and 2 is as follows.
Paper type not available Acceptable paper weight
Plain paper 1 64 to 80g/m² Max. 20 lb. Bond
Full color Plain paper 2 81 to 105g/m² Max. 28 lb. Bond
Do not use the following code corresponding to plain paper 1 and 2 for the adjustment.
Paper type Color to adjust [08] code Subcode
Y (yellow) 0
M (magenta) 1
C (cyan) 2
Full color /
Black Plain paper 1, 2
K (black)
08-2513
3
• When performing the adjustment in accordance with the procedure, note that the density of a
gradation area (halftone), such as a photograph, is adjusted as well as that of a solid colored
image.