Toshiba 5520c, 6520c

3-54

3. Printer-specific Adjustments

Ex.: • When printing on Windows is performed with the following options selected: PCL6, Image

Quality Type = Presentation, Halftone =Detail

> Change the values for Y: 05-8062, M: 05-8063, C: 05-8064 and K: 05-8065.

• When printing on Macintosh is with the following option selected: Image Type = Line Art,

Halftone = Auto

> Change the values for Y: 05-8054, M: 05-8055, C: 05-8056 and K: 05-8057.

* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)

Color to

adjust

PDL Halftone [05]

code

Subcode

Recommended

value

Acceptable

value range

Default

PCL6 Detail 05-8062 0/1/2

PS3 (600dpi) Detail 05-8054 0/1/2

PS3 (1200dpi) Detail 05-8272 0/1/2

(Yellow)

XPS Detail 05-8046 0/1/2

PCL6 Detail 05-8063 0/1/2

PS3 (600dpi) Detail 05-8055 0/1/2

PS3 (1200dpi) Detail 05-8273 0/1/2

(Magenta)

XPS Detail 05-8047 0/1/2

PCL6 Detail 05-8064 0/1/2

PS3 (600dpi) Detail 05-8056 0/1/2

PS3 (1200dpi) Detail 05-8274 0/1/2

(Cyan)

XPS Detail 05-8048 0/1/2

PCL6 Detail 05-8065 0/1/2

PS3 (600dpi) Detail 05-8057 0/1/2

PS3 (1200dpi) Detail 05-8275 0/1/2

(Black)

XPS Detail 05-8049 0/1/2

Set a value larger

than 128. 0 to 255 128

* Set the value in increments of approximately 20, while checking the printouts until the optimum

value is obtained.

* The value for [05] code for K (black) will affect black-and-white images (including text, lines and

photos) on the printout.

* The subcode varies according to the area where the density is adjusted. Refer to the table below

and set the subcode for the area to be adjusted.

Subcode Area where the density is adjusted

0 Low-density area

1 Medium-density area

2 High-density area

<Note> This adjustment changes the values set in the MFP. Therefore, it will affect every user who uses

the printer by connecting it to the MFP. After the adjustment, the values changed will be applied

to all printouts for the "Image Quality Type" and "Halftone" options. (For instance, if the value

for [05] code for PCL6 and Detail is changed, it will be applied to printing performed with

PCL6 and Halftone = "Detail" (or "Auto") selected.)

Carefully perform the adjustment, being aware that the image quality of all future printouts will

be changed, when printing out originals other than the one that is used for the adjustment.

If "Smooth" is selected from among the "Halftone" options, this adjustment will have no affect.

After adjusting the color balance, print and check the print image quality.

If further image quality adjustments are still necessary, use the next procedure.