Toshiba AS311 user manual CH1 time-out check 25 and CH2 time-out check, Register Configuration

4. Register Configuration

CH1 time-out check (25) and

CH2 time-out check (89)

The address 25 (for channel 1) and the address 89 (for channel 2) store the time-out check times. If the time between each receiving character exceeds the specified time-out check time, it becomes the receiving time-out error. The default setting is 1 second.

To change the setting, write the desired data into this address then write the hot reset command into the Command 1 (12). See section 5.7 for this procedure.

25 or 89

F E D C B A 9 8 7 6 5 4 3 2 1 0

Time-out check time

Bit F-0	Time-out check	Stores the time-out check time (0.1 s units).
	time	Valid data range is 1 to 600 (0.1 to 60 s). If 0 or more
		than 600 is specified, the time-out check will not work.
		Initial value at power on is 10 (1 s).

User’s Manual 35