TOSHIBA AT100
■ This tablet does not support a printer connected to the USB port.
■This tablet only support external USB HDD (FAT only) and USB Flash Memory (FAT only) for data copy.
■Though USB hubs, USB flash memory and USB HDDs are also supported, the proper function and behavior of all such devices is not guaranteed.
■If the USB device you connected is not supported by this tablet, a notification will be shown.
■This tablet supports FAT12/16/32/exFAT format for USB memory and USB hard drives.
HDMI device
The tablet is equipped with an HDMI port that can send video by connecting with external devices. 720p, 576p and 480p signal formats are supported, but actually available signal format depends on each HDMI device.
To connect external devices, follow the steps as detailed below:
As the port operation of all HDMI
1.Plug one end of the HDMI cable into the HDMI port of the HDMI device.
2.Plug the other end of the HDMI cable into the HDMI port on your tablet.
1
2
1. HDMI port | 2. HDMI cable |
| (Sample Illustration) Connecting an HDMI cable |
Please connect or disconnect an HDMI device to or from the tablet under the following conditions:
■The tablet is turned on.
■The tablet is completely turned off.
Do not do so when the tablet is in Sleep Mode or Hibernation Mode.
User’s Manual |
