E5-1
5. INSTALLING THE PRINTER ENGLISH VERSION EM1-33031
5.1 Connecting the Power Cord and Cables
WARNING!

Turn the POWER SWITCH to OFF before connecting the power cord or cables.

Fig. 5-1
5. INSTALLING THE PRINTER

5.1 Connecting the Power Cord and Cables

5.2 Procedure for Fitting Fan Filter

Serial I/F Cable (RS-232C)
Fig. 5-2
Expansion I/O Cable
Power Cord
When installing the printer, it is important to ensure that the fan filter is attached before using the printer.
The filter comes in 2 parts:
(1) FILTER PAD
(2) FILTER RETAINER
To fit put the filter pad inside the filter retainer and simply press into place according to the diagram above,
ensuring connecting pins are aligned with connecting holes.
Snap on
Snap on
Parallel I/F Cable (Centronics) High Speed PC Inter-
face Cable (Option)