Toshiba B-570-QP Series Media is now loaded and the sensor position is set, Batch type

6. LOADING THE MEDIA

ENGLISH VERSION EM1-33031

6. LOADING THE MEDIA

10. The media is now loaded and the sensor position is set.

Batch type:

Media

Fig. 6-9

NOTE: Set the selection switch to the STANDARD/STRIP position. Improper setting can affect the print quality.

Strip type:

1Remove enough labels from the leading edge media to leave 500 mm of backing paper exposed.

2Wind the backing paper onto the take-up spool and fix in position with the take-up clip. (Wind the paper counter clockwise around the spool as this is the direction it rotates.)

3Rotate the take-up spool anti-clockwise a few times to take up any slack in the backing paper.

	Media
	Take-up Spool
Front Plate	Take-up Clip
Black Screw
(HAA-0004001)	Backing Paper

Fig. 6-10

NOTES: 1. The backing paper is easier to feed back to the take-up spool if the front plate is removed.

2.When fitting the tace-up clip the longer side of the clip should be fitted into the shallow groove on the take-up spool.

3.Set the selection switch to the STANDARD/STRIP position.

E6-5