Toshiba B-570-QP Series owner manual Cleaning the Cutter Unit, Auto Ribbon Saving Mode, Approx mm

10. GENERAL MAINTENANCE

ENGLISH VERSION EM1-33031

10.3 Removing Jammed Paper

■Cleaning the Cutter Unit

WARNING!

1.Be sure to turn the power off before cleaning the cutter unit.

2.The cutters are sharp and care should be taken not to injure yourself when cleaning.

1.Loosen two screws and remove the cutter cover.

2.Remove the white screw and media guide.

3.Remove the jammed paper and trash.

4.Clean the cutter with dry cloth.

Media Guide	Fixed Cutter
Screw

White Screw (24741710304)

Cutter Cover

Cutter Unit

Swing Cutter

Fig. 10-3

5.Assembling is reverse order of removal.

■Auto Ribbon Saving Mode

Auto ribbon saving function is activated when it is selected by DIP switch (Refer to page 4-1) and no print area extends more than 20 mm.

NOTE: According to the relation between the outer diameter of rewound ribbon and print speed, ribbon loss per saving varies as follows:

Print speed	Ribbon loss
3"/sec.	Approx. 5 mm
5"/sec.	Approx. 8 mm
8"/sec.	Approx. 17 mm

E10-3