Toshiba B-570-QP Series owner manual Inserting the Optional Flash Memory Card

8. INSERTING THE OPTIONAL FLASH MEMORY CARD

ENGLISH VERSION EM1-33031

8. INSERTING THE OPTIONAL FLASH MEMORY CARD

8. INSERTING THE OPTIONAL FLASH MEMORY CARD

WARNING!

Turn the power OFF when inserting or removing the flash memory card.

CAUTION:

To protect memory cards, discharge static electricity from your body by touching the printer rear cover prior touching the memory cards.

1.Turn the power off.

2.Insert the flash memory card into the memory card slot at the rear of the printer.

3.Turn the power on.

Flash memory Card

Fig. 8-1

NOTES: 1. Be sure to protect a flash memory card when not in use in the printer by putting it in it's protective cover.

2.Do not subject the card to any shocks or excessive forces.

3.Do not expose the card to extremes of heat by either storing in direct sunlight or close to a heater.

4.Do not expose the card to excessive humidity by wiping it with a wet cloth or storing it in a damp place.

5.Before inserting or removing the card, make sure that the power switch is turned off.

6.The following flash cards can be used. (The 1MB-card is read only and the 4MB card can read/ write.)

Capacity	Maker	Type	Device code	Maker code
1M Byte	Maxell	EF-1M-TB AA	D0H	1CH
	Mitsubishi	MF81M1-GBDAT01
4M Byte	Maxell	EF-4M-TB CC	88H	B0H
	Maxell	EF-4M-TB DC	ADH	04H
	Centennial Technologies INC.	FL04M-15-11119-03		01H
	INTEL	IMC004FLSA	A2H	89H
	Simple TECHNOLOGY	STI-FL/4A
	Mitsubishi	MF84M1-G7DAT01
	PC Card KING MAX	FJN-004M6C
	PC Card	FJP-004M6R	A0H	89H

E8-1