2. MAJOR UNIT REPLACEMENT
2.1 OPENING AND REMOVING THE COVERS
NOTE: After removing the screws, unhook the side cover L from portion B by lifting and moving it toward the front of the printer.
Hook
Portion B
Side Cover L 
5)Disconnect the operation panel harness from CN13 on the MAIN PC Board.
Operation Panel Harness
CN13
MAIN PC
Board
NOTE: Instructions to open the top cover and to detach the side covers L and R are omitted from each removal/installation procedure provided below.
2.2 LUBRICATION
CAUTION!
1.Lubrication: During parts replacement
2.Kinds of oil: FLOIL
3.Do not spray the inside of the printer with lubricants. Unsuitable oil can damage the mechanism.
All machines are generally delivered in their best condition. Efforts should be made to keep them that way. Lack of oil, or the presence of debris or dust, may cause an unexpected failure. To maintain in optional operating condition, periodically clean the machine and apply the proper kind of oil to each part in which lubrication is needed.
Although the frequency of lubrication varies according to how often the machine is used, as a minimum it is necessary to lubricate before any part becomes dry. It is also necessary to wipe off excessive oil or it will collect dirt.
