11. TROUBLESHOOTING

 

 

EO1-33038

 

 

 

 

 

11. TROUBLESHOOTING

 

 

 

 

 

 

 

 

 

 

 

 

Status

Cause

 

Corrective action

Indicator

 

 

There is insufficient

 

Open the media cover and close it

Blinks in

area in the flash ROM.

 

again. Erase the data.

Red

The print mode is not

 

Open the media cover and close it

 

selected correctly.

 

again. Send the correct print mode

 

 

 

 

from the PC or handy terminal.

 

 

 

 

 

 

Lights

The battery voltage is

 

Turn off the printer and replace the

in Red

low.

 

battery with a fully charged one.

 

 

 

 

 

 

Lights

The battery is nearly

 

Replace the battery with a fully charged

in

end.

 

one as soon as possible.

Orange

 

 

 

 

 

 

 

 

 

 

 

Blinks

The printer is printing

 

Wait until the printer finishes printing or

in

or communicating with

 

communicating.

Green

the PC or handy

 

 

 

or

terminal.

 

 

 

Orange

 

 

 

 

 

 

 

 

 

 

 

Lights

The power is on.

 

This is not a failure or an error.

in

 

 

 

 

 

Green

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other problems

 

Cause

Corrective action

 

 

 

The printer power does

The battery pack is not

Load a fully charged

not turn on by pressing

loaded.

 

 

battery pack.

the power switch.

 

 

 

 

 

 

 

In spite of using a fully

The battery life is

Replace the battery with a

charged battery, it does

expired.

 

 

new one which has been

not last long.

 

 

 

fully charged.

 

 

 

 

 

 

 

 

11- 2

 

Page 43
Image 43
Toshiba B-SP2D owner manual Cause Corrective action