4. INSTALLING THE PRINTER

EO1-33038

4.1 LOADING THE BATTERY

4. INSTALLING THE PRINTER

4.1 LOADING THE BATTERY

WARNING!

1.Be sure to turn OFF the printer before loading the battery.

2.Use the B-SP2D-BT lithium-ion battery pack only. And to charge the B-SP2D-BT battery pack, be sure to use the optional B-SP2D-CHG battery charger or B-SP2D-CHG55-slot battery charger. Failure to do this may cause explosion, combustion, or heat.

3.If the battery pack leaks liquid or gives out smoke or bad smell, immediately stop using it and keep it away from fire. Failure to do this may cause explosion or combustion.

4.In the United States, used lithium ion batteries should be returned to the store where you bought the machine. (USA only)

5.LITHIUM ION BATTERY DISPOSE OF PROPERLY

Caution: Do not handle damaged or leaking lithium ion battery.

NOTE: Regarding the charging procedure, refer to the Owner's Manual of the B-SP2D-CHG or B-SP2D-CHG5.

1)First slide the battery cover (1) and then open the battery cover (2).

(2)

(1)

Battery Cover

4- 1

Page 23
Image 23
Toshiba B-SP2D owner manual Installing the Printer, Loading the Battery