4. INSTALLING THE PRINTER |
4.1 LOADING THE BATTERY
2)Load a fully charged battery into the printer with the electrode facing down.
NOTE: Load the battery in the correct orientation as indicated in the following |
picture. |
Battery |
Pack |
3)Close the battery cover completely.
NOTES:
1.If the battery cover is not completely closed, the battery pack may drop from the printer while it is carried, causing injury.
2.Be careful not to apply excessive force to the battery cover when it is opened, as this may break the battery cover.
■Battery status indication at the power on time
Fully charged: | Flashes in red for a few seconds, and then lights in |
| green. |
Battery near end: | Flashes in red for a few seconds, and then lights in |
| orange. |
Low battery: | Flashes in red for a few seconds, and then lights in red. |
If the status indicator does not light at all, there may be one of the following problems:
•The battery pack is not loaded.
•The battery is almost dead. (The battery has been excessively discharged.)
•The printer is faulty.
4- 2
