Toshiba DK280 manual STATION-TO-STATION Message Waiting

To Use Station-to-Station Message Waiting:

1.Lift the handset.

2 . Dial the desired station number.

3.The calling station user presses the Msg button to set the Msg

-LED on the called

._ station.

4 . To answer the Msg LED indication from the called station, press the Msg button.

5.To clear the Msg LED from the calling station, press the Intercom button, dial the station number and press the Msg button twice (or 7 7).

6.To clear the Msg LED from the called station, press Intercom button, dial # 4 0 9.

3.XX = The amount of time (06-60 seconds) that the telephone will ring before Call Forward-No Answer or Call Forward-Busy/No Answer is invoked. The ring time does not have to be entered each time Call Fonvard is set-on/y when you want to change the number of seconds the telephone rings before it forwards.

4.if call forward is set:

WCentral Office (CO) lines-that ring at your station only will forward (CO lines that ring into more than one station will not forward).

1CO fine calls transferred to your station will forward. n Intercom calls will forward.

n Call forward redirects the station hunt feature.

STATION-TO-STATION MESSAGE WAITING

If there is no answer (busy or DND), press the Msg button (or dial 7). This causes the Msg LED on the called station to flash. The called station’s LCD displays the calling station’s number.

When the returned call is answered, the flashing Msg LED will turn off

NOTE:

Up to four message waiting displays may be stored on the LCD. The station number in the left-most position will be called when the Msg button is pressed. To rotate the station numbers, press the Scroll button. The fourth message is reserved for the Message Center.

2-3