Toshiba DK280 manual Press the intercom buttonand dial, Toshiba EXT.200 Date DAY Time, After clear

To Enter Name/Number information:

1.Press the intercom buttonand dial

#621.

IUSER NAME?

2.Enter the new information via the dialpad.

3.Press the Spkr button.

TOSHIBA EXT.200

DATE DAY TIME I

To Clear Name/Number

Display:

Press the Intercom button, dial # 6 2 0 and ITSS the Spkr button.

,__- During clear:

N O . N N N

USER NAME RESET 1

After clear:

DATE DAY TIME

To Enter Name/Number Information for Other Stations/Devices:

1.Turn off Soft Keys by pressing Mode 7 0, when telephone is idle.

turned on). Name display information for non-LCD telephones or voice mail/auto attendant devices may be stored from station 200. When NAME/NUMBER is recorded for non-LCD telephones or other devices, their NAME/NUMBER is displayed on LCD telephones when called.

“USER NAME?” will appear on the upper line of the LCD.

Current information will appear on the lower line of the LCD.

Refer to “Recording a Message” earlier in this chapter for dialpad instructions. Up to 16 characters can-be recorded. It is recommended that you enter the station number along with the user’s name (as shown in Step 3).

The new information is stored and will appear on the top line of the display. For example, if you entered “TOSHIBA EXT. 200,” that will appear above the date/day/time on the display.

You will hear a confirmation tone, then a busy tone.

NOTES:

1 . Your title will appear on the LCD during direct intercom, forwarded, and hunted calls. On override or OCA calls, the LCD will not display the title.

2. After a name is cleared, it may be redisplayed at any time by dialing

Intercom # 6 2 1.

3. A name is displaced by message and call forward settings if they at-e set.

4 . To erase NAMUNUMBER information from memory, repeat Steps 1 - 3 above and enter blanks in Step 2. Blanks are entered by pressing 1 in the alpha mode.

Entering Name/Number information for other stations or devices is only allowed from Station 200.

4-5