Toshiba DK280 Explanation, Dialpad buttons, Press * or 1 to move, Cursor to, Desired position

To Record a Message:

1. Press the # button to

access alpha

characters. Refer to

Figure 4-l for an

explanation of the

dialpad buttons.

2. Press * or 1 to move

the cursor (-) to the

desired position (the

left edge of the display

for a new message, or

1button moves

cursor to the right

(also used to access special characters and to enter “blanks” in the alpha mode)

Jr button moves the cursor to the left

Each button has three letters that are used in

two spaces to the right

of the preprogrammed

message to add

information).

3. Press the button that

has the letter you want

to enter. Use the 0

button to shift from

letter to letter on the

button.

4. If you want to enter a

number, press the #

button to change to

numeric characters.

Press the # button

again to return to alpha

characters.

5. The following special

characters are set by

pressing 1 and then

pressing 0 to step

through the available

characters: Q, Z, :, -, +, /.

4-2

0 button is used to shift between the three letters on each alpha button (also used to access special characters)

I

Figure 4-l

Dialpad information

For example: If you press 3, a “D” will be displayed. By pressing 0, the “D” is changed to “E”. By pressing 0 again, the “E” is changed to “F”. Press 0 again and the “F” changes to “D”. To enter a space, press 1.

Numbers are also entered on the dialpad.