2.Dial the number of the message you want.
3.Press the LCD Msg
Select (or Spkr) button.
To Cancel a Message that
Has Been Set at Your Station:
Press the LCD Msg Select button.
To Cancel a Message if
You Do Not Have a LCD Msg Select Button:
1.Press the Intercom button.
2.Dial # 6 8.
3.Press the Spkr button.
message is displayed. (To add to this message, use the procedure for “Recording A Message,” found earlier in this chapter.)
The LCD Msg Select LED lights steadily, and the selected message will be set. The message will be sent to LCD telephones that call your telephone.
CANCELLING A CALLING STATION MESSAGE
The LCD Msg Select LED goes out.
The Intercom LED lights.
The Intercom LED goes out. A personal message (10 - 19) will remain stored in memory.
SETTING/CHANGING CALLING STATION MESSAGES
You can set a completely new, personalized message by overwriting any of thE existing preprogrammed messages. To do this, simply call up one of the . 2 messages as explained previously. When the cursor appears to the right of the message, shift it to the left margin and write your new message over the preprogrammed one. The new message will remain on your station until canceled. It will then be erased and the original preprogrammed message will be restored.
NOTES:
1. Refer to Recording a
2.Messages 60 m 99 will be erased. Messages 7 0 w 79 will remain in memory until changed. The preprogrammed messages are never erased; only the
STORING LCD NAME/NUMBER DISPLAY
This feature allows you to use your telephone to store a title (such as your name, telephone number, location, etc.) in system memory. This title (e.g., LOBBY) will display on your station’s LCD while it is idle, and it will appear at other stations’ LCDs when they are called from your station. Your NAME will display on other telephone LCDs when they are used to call your telephone (Soft Keys must be
4- 4
