CHAPTER 4
To Store a Message in Memory:
1.Press the LCD Msg Select (or Intercom
# 6 8) button.
MSG NO.?
2.Dial the
3.Use the Recording a Message procedure to enter the message
characters.
-4. Press the LCD Msg Select (or Spkr) button.
5.Press the LCD Msg Select (or Intercom
# 6 8 Spkr) button.
LCD ALPHANUMERIC MESSAGES, NAMES, MEMOS
The LCD on your telephone can be used to send or receive messages to or from other LCD telephone users. The LCD can also display the names/numbers of the person calling your telephone or the name of the person you are calling. Names and memos can also be set to display with speed dial numbers and timed reminders.
STORING A MESSAGE IN MEMORY
The LCD Msg Select LED flashes.
Personal message (10 - 19); system message (60 - 99 port 00 only). The current message, if any, will be displayed.
The LCD Msg Select LED lights steadily, and the LCD displays the message. The message will now be stored in system memory.
The LCD Msg Select LED goes out, and the message will no longer appear on the LCD, but it will remain in memory.
RECORDING A MESSAGE
RECORDING A MESSAGE, NAME, OR MEMO
Use this procedure to enter the characters of a personal message (10 - 19) or system message (60 - 99, Station 200 only), to add to a preprogrammed message, or to edit and set a new message. After calling up a message on your display (see Storing a Message in Memory, Steps 1 and 2 above), perform one of the following procedures:
