To Program Speed Dial Names and Numbers:

1.Press the Redial button, then the

Speed Dial button.

2.Dial the desired speed dial code.

[sptio]

3.Press the Mode button.

[““]

4. Enter the name or

_- memo (refer to Recording a Message for method).

5. Press the Mode button.

6. Enter the desired telephone number (16 digits maximum).

7.Press the Redial button to record data in memory.

8.Repeat steps 2-7 to enter more memos.

To Dial a Speed Dial

Number:

1.Press the Mode button when telephone is idle.

SPEED DIAL MEMO

This feature allows an LCD user to program a 12-character name for each of his/her 40 personal speed dial numbers. The memo pad of names may be stepped through to select the appropriate party. Memos may also be added to the 40 or 100 system speed dial codes, depending on your system’s size, via the

station connected to port 000, station number

 

(usually 200).

Press SDS or * if your telephone is not equipped with a Speed Dial button.

NNor NNN = Speed Dial Code. (lo-49 station) or (60-99 or 600 w 699: depending on your particular system size, from station 200 only)

If a name was previously stored on this code, it will display on the top line of the LCD.

The name will appear on the bottom line of the LCD as you enter it.

The number will appear on the top line of the LCD as you enter it.

The LCD displays “MODE NO.?”

.

4-7

Page 37
Image 37
Toshiba DK280 manual To Dial a Speed Dial Number, Press the Mode button when telephone is idle