Press SDS or *if your telephone is not equipped with a Speed Dial
button.
NN = Speed Dial Code. (10~49 station) or (60~99 system station 200
only)
If a name was previously stored on this code, it will display on the top line
of the LCD.
The name will appear on the bottom line of the LCD as you enter it.
The number will appear on the top line of the LCD as you enter it.
The LCD displays “MODE NO.?”
The speed dial number appears with name or memo. Personal speed
dial code numbers are 10 ~ 49, and system numbers, stored from station
200 only, are 60 ~ 99.
STRATA DK MESSAGES AND MEMOS
4-8
To Program Speed Dial Names
and Numbers:
1. Press the Redial button,
then the Speed Dial button.
2. Dial the desired speed dial
code.
3. Press the Mode button.
4. Enter the name or memo
(refer to Recording a
Message for method).
5. Press the Mode button.
6. Enter the desired telephone
number (16 digits maximum).
7. Press the Redial button to
record data in memory.
8. Repeat steps 2–7 to enter
more memos.
To Dial a Speed Dial Number:
1. Press the Mode button
when telephone is idle.
2. Dial 8 NN (NN = 1 0 ~ 4 9
or 6 0 ~ 6 9).
3. Press the Page button to
scan the directory for the
appropriate number/memo.
#*NN SP EED D IAL
*10 NAME
SPEED D IAL