STRATA DK | INTRODUCTION |
ACTION TEXT
SPECIFIC INSTRUCTIONS ON HOW TO PERFORM A
PROCEDURE ARE NUMBERED AND ENTERED IN
THE
STRATA DK
To Use Station-to-Station Message Waiting:
1.Lift the handset.
2.Dial the desired station number.
3.The called station user presses the Intercom and Msg buttons to return the call.
4.To clear the Msg LED from the called station, press the Msg button.
5.To clear the Msg LED from the calling station, press the Intercom button, dial the station number and press the Msg button twice (or 7 7).
FEATURE OPERATION
NOTES:
1.To cancel call forward, press Intercom 6 0 1 Spkr (or press the call forward button used to set call forward).
2.If call forward is set:
■Central Office (CO) lines that ring at your station only will forward (CO lines that ring into more than one station will not forward).
■CO line calls transferred to your station will forward.
■Intercom calls will forward.
■Call forward redirects the station hunt feature.
STATION-TO-STATION MESSAGE WAITING
If there is no answer (busy or DND), press the Msg button (or dial 7). This causes the Msg LED on the called station to flash. The called station’s LCD displays the calling station’s number.
When the returned call is answered, the flashing Msg LED will turn off.
NOTE:
Up to four message waiting displays may be stored on the LCD. The station number in the
CHAPTER TITLES
NOTES AND
WARNING
MESSAGES
FIRST LEVEL
HEADINGS
RESULTS OR
DETAILS
EXPLANATIONS OR DETAILS OF THE ACTION TEXT.
Figure I-1 Sample Page
v
