STRATA DK | MESSAGES AND MEMOS |
|
10. Dial 0. | The LCD displays date/day/time. The LCD then displays “SENT NNNM” | |
| at originating station, and the originating station number and a message | |
| indication are displayed on the destination station LCD. | |
To Receive a Called Station
Message:
1.Press the Intercom and Msg button.
To Set a Calling Station | remote CALLING STATION MESSAGING | |
| ||
Message for Another Station: |
| |
1. | Press the Mode button | The LCD displays “MODE?” |
| when your telephone is idle. |
|
2. | Dial 9 5. | The LCD displays “MODE 95 DEST EKT NO.?” |
3. | Dial the “destination” station | The LCD displays “MODE 95 DEST EKT NO.NN”. |
| number. |
|
4. | Press the Page button. | The LCD displays “MSG NO.?” |
5. | Enter the desired message | The LCD displays the message. |
| number. |
|
6. | Press the Page button. | The LCD displays “MSG NO.?” |
|
| NOTE: |
|
| Group calling station messaging allows you to set a calling station |
|
| message for only one station at a time. |
7. | Press the Mode button. | The LCD displays “MODE NO.?” |
8. | Dial 0. | Your LCD shows the time and date. The message is displayed at the |
|
| “destination” station. Any station calling the “destination” station receives |
|
| the message. |
BUSY STATION MESSAGING
When reaching a busy LCD station, a message can be sent to that station (an audible tone will be heard). The busy station may also return a message to the calling station’s LCD. The two stations may continue this procedure to carry on a “silent” conversation. Soft Keys must be off (Mode 70) at the sending and receiving stations for this feature to operate.
