Personal message (10 ~ 19) and system (60 ~ 99). The message does
not display when setting a timed reminder—it displays when the reminder
activates. Messages are set using the Record a Message method.
The LCD displays “DATA PROGRAMED”. You will hear a confirmation
tone. The message will be displayed at the specified time, and a beeping
tone will be heard for 30 seconds (or until it is canceled by pressing the
Mode button and then dialing 0).
MESSAGE SENDING
The Alphanumeric Messaging feature on your LCD digital telephone
enables you to set short text (up to 32 characters) at your station to
ensure that you do not miss important calls. Any station may record a
message; however, only stations with the LCD are able to display
messages. Stations that do not use Soft Keys (Soft Keys Off: Mode 7 0)
may send messages “live” to other LCD station users. To record
messages, see the Recording a Message section in this guide.
Your system has up to 40 preprogrammed messages that may be sent to
other LCD digital or electronic telephones. You can temporarily add to or
change any of these messages, in order to leave a personalized
message at your station (see Note below).
Some stations may record and save up to 10 personal messages to be
used for all types of station messaging. This is a station option that is
enabled in system programming.
CALLED STATION MESSAGING
Your station number and a message indication may be sent to another
LCD station. When that station responds, it will receive the message.
Soft Keys must be off (MODE 70) at the sending station for this feature to
operate.
The LCD displays “MODE?”
STRATA DK MESSAGES AND MEMOS

4-10

5. Enter the desired message
number.
6. Press the Redial button to
record the data in memory.
To Set a Called Station
Message:
1. Dial the station number
(station does not answer or is
busy).
2. Press the Mode button.