STRATA DK MESSAGES AND MEMOS
4-2
Dialpad Information
If you press 3, a “D” will be displayed. By pressing 0, the “D” is changed
to “E”. By pressing 0again, the “E” is changed to “F”. Press 0again and
the “F” changes to “D”.
To enter a space, press 1.
Q, Z, :, -, +, /.
To Record a Message:
1. Press the #button to access
alpha characters. Refer to
Figure 4-1 for an explanation
of the dialpad buttons.
2. Press *or 1to move the
cursor (–) to the desired
position (the left edge of the
display for a new message, or
two spaces to the right of the
preprogrammed message to
add information).
3. Press the button that has the
letter you want to enter. Use
the 0button to shift from
letter to letter on the button.
For example:
4. If you want to enter a number,
press the #button to change
to numeric characters.
Numbers are also entered on
the dialpad. Press the #
button again to return to alpha
characters.
5. The following special
characters are set by pressing
1and then pressing 0to step
through the available
characters:
# button alternates
between alpha and
numeric characters
Each button has three
letters that are used in
messaging; the 0 button
is used to shift between
the letters
* button moves the
cursor to the left
1
#
*2ABC 3DEF
4GHI 5JKL 6MNO
7PRS 8TUV 9WXY
0OPER
1 button moves
cursor to the right
(also used to access
special characters
and to enter "blanks"
in the alpha mode)
0 button is used to shift between the three letters on each alpha button (also
used to access special characters)