Other points
yDo not turn the power OFF with jammed paper left inside the equipment. This could cause malfunctions when the main switch is turned ON next time.
yBe sure to turn the power OFF when leaving the office or if there is a power failure.
yBe careful because the paper exit area and paper just after exiting are hot.
yDo not place anything other than paper on the receiving tray. This could disturb a normal operation and cause malfunctions.
yDo not touch the photoconductive drum surface or the transfer charger. This could cause image problems.
During maintenance or inspection
Warning
yNever attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or get an electric shock.
Always contact your service representative for maintenance or repair of the internal parts of the equipment.
yDo not let liquids such as water and oil get into the system when cleaning the floor. This could cause a fire and give you an electric shock.
Caution
yAlways keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could cause a fire and give you an electric shock due to the heat released by electric leak- age.
Other points
yDo not use such solvents as thinner or alcohol when cleaning the surface of the equipment.
-This could warp the shape of the surface or leave it discoloured.
-When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
When handling supplies
Warning
yNever attempt to incinerate toner cartridges. This could cause an explosion. Do not dispose of used toner cartridges. Contact your service representative.
