Toshiba H-9000 Data Transmission, Price, Initial #0 #19, Message Link Message, Cancel Retry

9.PROGRAMMING PROCEDURES

9.15 LON SYSTEM

■ Data Transmission
The following data is down-line-loaded.
Page 1: (0). All (PLU+ING+NUTRI)	Page 2: (0). SPEED KEY
(1). PLU	(1). LOGO
(2). ING.	(2). VENDOR
(3). NUTRITION	(3). FREE FORMAT
(4). U. PRICE	(4). ADDRESS
(5). DATE/TIME	(5). INITIAL (#0 - #19)
(6). MESSAGE LINK (Message)	(9). CHANGE PAGE

(7). LOCK SCALE (Check the LON cable)

(8). OPEN SCALE (Release the lock after checking the LON cable.)

(9). CHANGE PAGE

n

Enter a DLL data. ENTER

p

Release the printer from the

error.

0:CANCEL

1:RETRY

NOTE: DLL is performed automatically in the following two ways. It is selectable by the Initial Settings #0-6 and #0-7.

(1)LOCK SCALE method

Step 1: “LOCK SCALE” is sent. (*1)

Step 2: Selected data is sent.		(*2)
Step 3: “OPEN SCALE” is sent.
*1: If an error occurs during step 1, the error terminal ID# is indicated.
Select “cancel”, “retry” or “continue” to release the terminal from an
error.
cancel:	Quits the operation after sending “OPEN SCALE”
retry:	Tries to send “LOCK SCALE” again.
continue: Ignores the error terminal and starts DLL.
*2: If an error occurs during step 2, the error terminal ID# is indicated.
Press the	CLEAR	key to return to the DLL data selection menu.
(2) Background DLL
Step 1: Selected data is sent.		(*3)

*3: If an error occurs, the error terminal ID# is indicated. Press the CLEAR key to return to the DLL data selection menu.

9- 25