Toshiba EO1-32004BE, H-9000N-US owner manual Transferring Logo Data, Verify H-9000=CMT

9.PROGRAMMING PROCEDURES

9.18 TRANSFERRING LOGO DATA

9.18TRANSFERRING LOGO DATA

Menu Page: 2

Item No.: 8

Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of logos, 320x118 dots and 256x64 dots, are available on the H-9000. 64 KB of RAM area is secured for logo data, in which the maximum of 13 logos (320x118 dots) or 26 logos (256x64 dots) can be stored. Before starting the following operation, set the initial setting #10-7 to 1.

<MENU>

Page 2

			Select a transmission item.
8	Load the tape into		1:	SAVE (H-9000→CMT)
	the CMT Loader		2:	VERIFY (H-9000=CMT)
			3:	LOAD (H-9000←CMT)
ENTER	PROG.	<MENU>
		Page 2
	ESC.	Main
		<MENU>

NOTE: Two sizes of logos are printed differently as follows:

Print LOGO (320 x 118 dots)

<Display>

64

256

(Part of LOGO is displayed.)

80

<Label>

1st LOGO

160

2nd LOGO

<Receipt>

Display LOGO (256 x 64 dots)

(Part of LOGO is

printed.)

104

118

256 64

FSP LOGO (Part of LOGO is overlapped with FSP print area.)

1st LOGO (LOGO is printed on the center of printing area.)

160

64

2nd LOGO

(Part of LOGO is

(LOGO #1 & half of LOGO #2 are printed.

: Logo data

: Print/Display area

9- 29

printed.)

FSP LOGO (LOGO is printed on part of FSP print area.)